[China Glass Net] Glass tables are becoming more and more popular, and they are especially favored by people because of their clear, transparent, crystal-clear and colorful colors. However, the fragile nature of the glass itself, such as fragility, hardness, and heat, poses a certain potential threat, so be careful when purchasing a glass table. Here are some tips on how to buy a glass table. Look at the appearance : the glass used in the glass table must use tempered glass. The tempered glass has several times higher strength than ordinary glass, the bending strength is 3~5 times that of ordinary glass, and the impact strength is ordinary glass 5~ 10 times, the tempered glass is broken and has small fragments without sharp angles, which guarantees its safety. The flatness, transparency and smoothness of the appearance also reflect the quality of the glass. The white paper on the bottom of the glass is placed on the bottom of the glass. The front view can clearly see the writing to judge its transparency. There is no obvious blockage when the hand touches the table. This kind of glass is smooth and flawless. Fleece Fabric,Anti Pilling Polar Fleece Fabric,Stripe Polar Fleece Fabric,Anti Static Polar Fleece Fabric Shaoxing Moying Textitle Co.,Ltd , https://www.moyingtextile.com
Firmness : The steel-wood chassis or the table of the bracket should ensure that the welding is free of desoldering, virtual welding and cracking. The joints of the screws or rivets are not loose, and the steel pipe frame is firmly connected with the solid wood feet. In particular, the dining chair is frequently used. When purchasing, pay attention to the materials and splicing methods of the chair. Generally speaking, the traditional squat structure is more difficult. Then the dining chair made of wood such as eucalyptus or eucalyptus is more durable. This must be taken care of when choosing to ensure the durability of the glass table.
To be humanized design : in some details, we must also pay attention to humanized treatment: the edge of the table top, the edge of the edging should be straight and smooth without obtuse angle, the surface of the glass table should be free of scratches, corners, etc., if consumers need it, consider it. Combination of table combinations, table turntables, storage space, etc.
Dimensional standards: The industry standard stipulates that the height of the dining table is 680mm-760mm; the height of the dining chair is 400mm-440mm; the height of the soft seat is 400mm-460mm, and the width of the armrest of the armchair is greater than or equal to 460mm. The test pieces placed on the inspection plate or the flat floor are measured with a steel tape measure or a steel ruler with an error of not more than ±0.6 mm per meter. These standards can be used as a reference for the optional glass table.
June 13, 2021