[China Glass Net] Glass film is used to protect glass and has good protection. However, the operation method of glass film is not so simple. If you want and apply glass film, you should master the glass. What are the precautions for the film and what are the steps for the glass film, and then let's take a closer look. Speaking of glass, many people should have heard of it. Glass film is used to protect glass and has good protection. However, the operation of glass film is not so simple, if you want and shop If you stick the glass film, you should master the precautions of the glass film and what is the glass filming step. Let's take a closer look. First, the glass film is good to choose the film on the cloudy day, the dust in the air in the cloudy sky is not so much, can avoid the dust and other debris affect the quality of the film. Glass foil window, just keep it for three days, don't move the window. The window that has just been attached is still between the glass and the glass for a certain period of time. Generally, it will gradually disappear in 2-3 days. 2. Do not hang any objects on the glass of the film. Do not use suction cups or stickers on the window film. Do not use water to clean the glass of the film within 15 days of the film being attached to the film. 3. When the film is applied, the adhesive tape, the glue remaining on the edge of the window or the glue may be used. The soft clean cotton cloth can be used to gently wipe the contaminated area with acetone, and the residual film can be quickly removed. The glue on it. A small amount of acetone does not damage the polyester film, but it immediately dissolves and completely evaporates the glue and most of the paint. 4. Do not touch the surface of the window film with sharp and hard objects, so as to avoid scratching the film and cleaning the daily film glass: firstly spray the appearance of the window film with a cleaning agent, then use a clean, soft cotton cloth or a water-absorbing cloth. Lightly dry the window film, cotton and absorbent wipes often need to be wrung out, and the pure external alcohol contained on the cotton/absorbent wipe will quickly dissolve infinite stains and fatty fingerprints. If the stain is not washed, spray the cleaning solution from the head, scrape the window film horizontally from top to bottom with a soft rubber wiper until it is dry, and wipe the margin of the window film with a towel. What is the glass filming step? First, the cutting: the glass film specifications are cut into more than 1cm than the surface of the veneer. This will avoid the trouble of sticking on one side (more on one side). Cleaning the glass: Before cleaning the cellophane, wipe off the grease, stains and dust on the glass and spray enough water on the glass (add one or two drops to clean) Fine is good), the degree of kneeling down. The purpose of water spray is to temporarily reduce the viscosity of the glass film, and it will not affect the viscosity after drying. Second, remove the back release film: remove the release film and spray enough water on the back of the glass film (with rubber surface), so that it can be moved back and forth on the glass during the paste process, which is convenient for the right position. Third, paste: First, after the average ratio of the glass film on the glass is good, stick it on the upper end of the glass and align it, and stick it from top to bottom. If there is no one-time right, you can re-open the repeated paste (the benefits of water spray). 4. Air bubbles: Use a scraper or an IP card to scrape water and air bubbles from the surrounding area. The water and air bubbles that cannot be caught are punctured with a needle or a blade. Until the water and bubbles are completely absent, the glass film is completely adhered to the glass. Cut off the remaining departments: After the paste is finished, use the blade to cut off the film of the excess department. What is the glass filming step? Glass film is very common in our life. As long as we master the method of pasting, we can paste it ourselves, but there are a lot of precautions to pay attention when pasting, so we are in the shop. When you paste it, you need to know what the precautions for the glass film are, so that you can stick a good-looking glass film. Shell Fabric,Shell Fabric Material,Shell 100 Polyester,Polyester Shell Fabric WUJIANG ZHONGTIAN JETWEAVING CO.,LTD , https://www.zhongtianfabric.com
June 22, 2023